Bleeding brake system

Make

Volkswagen

Model

Polo Mk3

Section

Brake systems › Brakes, hydraulics, regulator, servo › Bleeding brake system

Running gearBleeding brake system

Bleeding brake system Bleeding the brake system is described using brake filling and bleeding unit -VAS 5234- and -V.A.G 1869-.   Note t  Bleeding the brake system on vehicles with ABS is performed in same way as vehicles with a conventional brake system t  On non-ABS vehicles with a brake pressure regulator, move the regulator lever when bleeding rear brakes. t  Only use new brake fluid conforming to US standard FMVSS 116 DOT 4. t  Genuine VW/Audi brake fluid conforms to this specification. t  Brake fluid is poisonous. Also due to its corrosive effect brake fluid must not come into contact with paintwork. t  Brake fluid is hygroscopic, which means it absorbs moisture from the ambient air and should therefore always be stored in air tight containers. t  Rinse off spillages, by using plenty of water.

01 Steering & suspension