volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Rear brake caliper - repair > < Front brake caliper plunger - remove and install|Remove

Polo Mk4

Install
Install
The plunger and sealing ring surfaces can only be cleaned with alcohol and immediately dried.
–  Apply a light coat of Assembly putty - G 052 150 A2- on the plunger and sealing ring.
–  Install the sealing ring in the brake caliper case.
   
–  Install the protection cover with the external lip over the plunger.
  N47-0079
–  Install the internal lip in the cylinder groove with the Wedge -3409-.
Keep the plunger in front of the brake caliper case.
  N47-0059
–  Press the plunger with the repositioning device into the brake caliper case.
The external protection cover lip fits into the plunger groove.
  N47-0007

Rear brake caliper - repair > < Front brake caliper plunger - remove and install|Remove