940 L4-2.3L SOHC VIN 88 B230F (1992)
Press rear bushings inwards with screwdriver and pull forward sunroof headlining past control mechanisms.
Zero control mechanisms.
Tease out headlining.
Install new headlining.
Press in rear bushings on sunroof headlining as far as possible.
Install complete headlining into frame.
Press down and run forward control mechanisms approx 10 cm.
Press out rear bushings to correct positions.
Run back and zero control mechanisms.
Adjust cables:
- Check that line-up mark is opposite center of pivot pin.