volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12706 > < Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12704
Page 5
background image

Replace the four screws: Tighten front screws, M10, with tightening torque 50 Nm (37 ft.lb).  Tighten the two lower screws, M8, with
tightening torque 30 Nm (22 ft.lb).

Reconnect connector

Reconnect connector. 

Raise seatback.

Raise seatback with crank.

 

Replace:

Caps

Distance pieces and rake adjustment wheel.

Replace seat in vehicle.  See: Service and Repair/Remove Seat From Vehicle

Models to 1994:

Pull down control panel and fix screw in rear edge.

Replace battery negative lead.

1995 models:

Replace control panel.   See: Service and Repair/Control Panel For Power Seat, Change

Replace battery negative lead.

Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12706 > < Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12704