volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12712 > < Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12710
Page 5
background image

Replacement

Replace drive cables in motors.

Replace right bracket.

Replacement of brackets

Replace brackets with three motors.

Replacement of drive cables

Replace drive cables in drive gear and tighten locking plate.

Replacement

Replace seat in vehicle.  See: Service and Repair/Remove Seat From Vehicle

Replace batterv negative lead

Check

Seat without memory:

Check function.

Seat with memory:

Calibrate seat.

Check function.

Drive Cable Left, Center Seat-Cushion Motor, Change

Drive cable left, to center seat-cushion motor, change 

NOTE:  When performing the following tasks, take care that the seat guide rails do not altertheir position relative to one another, or it will not be
possible to replace the seat in the vehicle.

Remove: 

Preparations

Remove battery negative lead and note any radio code.

Remove seat from vehicle.  See: Service and Repair/Remove Seat From Vehicle

Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12712 > < Motor (1, 3 and 4) Under Seat-Cushion, Change|Page 12710