940 L4-2.3L SOHC VIN 88 B230F (1992)
Check
Seat without memory:
-
Check function.
Seat with memory:
-
Calibrate seat.
-
Check function.
Drive Cable (Left or Right) to Seatback Rake Motor, Change
Drive cable (left or right) to seatback rake motor, change
NOTE: Check first that seatback frame is not twisted or abraded due to a drive cable not functioning properly. If there is any damage replace both
seatback frame and drive cable.
Remove:
Removal
-
Remove battery negative lead and note any radio code.
-
Remove seat from vehicle. See: Service and Repair/Remove Seat From Vehicle
-
Remove seatback from seat. Slacken off the four screws.
Models to 1994:
-
Slacken off screw in rear edge of side panel.
-
Carefully lift side panel. NOTE: Short wiring.
1995 models:
-
Remove control panel. See: Service and Repair/Control Panel For Power Seat, Change