Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Page 3356
Grease seal and seat
Press in seal. Use sleeve 5283.
Note: Make sure seal is not distorted or damaged during fitting.
Check basic setting
Install timing belt
IMPORTANT! Do not turn crankshaft or camshaft. Pistons may strike valves.
Position pulley according to marking.
Install timing belt on crankshaft and camshaft. Two lines on timing belt should be opposite crankshaft marking.
Stretch timing belt and install it on camshaft and belt tensioner.
Make sure timing belt is correctly positioned and that pulley markings are opposite markings on engine.
Install lower timing belt cover and vibration damper
Stage 1 60 Nm (45 ft lbs).
|[PREV PAGE] [NEXT PAGE]|