Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Page 3355
Install timing belt tensioner
Install pulleys as applicable
Position guide plates of camshaft pulley so that they incline outwards from pulley.
Position intermediate shaft pulley with marking (a cavity) outwards.
Hold pulley using tool 5034.
Torque to 50 Nm (36 ft lbs).
Remove oil seal
Carefully pry loose seal with a screwdriver. Contact face must not become damaged.
Clean and check contact faces
for scoring and other damages.
Install new seal
|[PREV PAGE] [NEXT PAGE]|