940 L4-2.3L SOHC VIN 88 B230F (1992)
4. Remove clutch plate retaining nut. Use counterhold 999 5596 in tool kit and 19 mm swivel-head wrench (or ratchet handle and 19 mm socket).
NOTE: When dismantling: Place components on bench in order of removal to facilitate reassembly.
5. Remove clutch plate.
Use puller 999 5597 in tool kit.
6. Remove shaft key.
Tap out gently with brass or copper drift. Although a screwdriver may be easier to use in some cases, great care must be exercised to avoid
damaging shaft or key.
7. Remove shims (two). Use screwdriver and tool 999 5603 with the small hook.
Note: Keep track of the order in which the shims are installed. Shims must be replaced in the same order.
