940 L4-2.3L SOHC VIN 88 B230F (1992)
12. Remove O-ring in body. Use tool 999 5603 with the small hook.
NOTE: Do not score O-ring groove.
Inspect O-ring groove for impurities. Wipe clean as required with lint-free cloth.
NOTE: Compressed air must net be used.
13. Remove carbon seal. Use tool 999 5606 with black handle. Press in tool, turn clockwise and lift out seal.
14. Inspect to ensure that carbon seal has left no particles or other contamination. Wipe surfaces with dry, lint-free cloth.
NOTE: Compressed air must not be used to blow clean.
ASSEMBLY
NOTE: Do not touch seal faces when opening package.
15. Place shaft guard 999 5808 in position. Purpose of guard is to ensure that carbon seal O-ring is not damaged during installation.
Lubricate outside of shaft guard with compressor oil (ester oil), P/N 1161442-7.
