940 L4-2.3L SOHC VIN 88 B230F (1992)
19. Install retainer and felt ring (with felt surface facing downward). Use socket (e.g. 20 mm) which fits in retainer to press ring home.
Upper edge of retainer should be located immediately below upper edge of compressor neck.
20. Reinstall shims. Shims must be installed in same order as before (see operation AAE7). Use hook 999 5603.
21. Install shaft key. Tap gently into position with a drift or screwdriver.
22. Install clutch plate.
Ensure that slot in plate is aligned with shaft key. Feel with hand to ensure that plate is correctly seated.
Press down plate as far as possible by hand.
