940 L4-2.3L SOHC VIN 88 B230F (1992)
Control Assembly: Service and Repair
Standard Heater
Standard heater, Heater control panel, replacement
Note: Control panel may differ from that shown, but replacement procedure remains the same.
Removal
Disconnect battery ground.
Remove heater control panel trim.
Allow control panel to remain suspended from wiring.
Remove/disconnect:
-
control panel from dashboard
-
insulating sleeve from switch
-
control panel light
-
control cables.
Lift out control panel.
Installation
Reconnect control cables.
Adjust controls.