940 L4-2.3L SOHC VIN 88 B230F (1992)
-
Connect the black-white cable included in the new cable harness to the ground plate on the right side of the cowl.
The ground plate is located behind the fuel control module.
A10
Route cables to engine compartment
-
Route the green cables on the cable harness to the engine compartment through the vacant hole in the grommet under the brace to the suspension strut
(tower).
1988 and 1989 models
-
Connect the flat connectors
1990 cars (shown here):
-
Connect the round connectors.
Connect all unconnected connectors up to each other.
A11
Location of opening in cable sheath
The cable sheath is cut to drain off condensation.
