940 L4-2.3L SOHC VIN 88 B230F (1992)
-
Connect control module and cable harness connectors together.
-
Apply three butyl tape sections on the control module.
-
Install control module on dashboard side section with butyl tape
E7
Connection to ground plate
-
Connect the black-white cable included in the cable harness to the ground plate on the right side of the cowl.
The ground plate is located behind the fuel control module.
The ground lead has a multiple tab terminal for when there are no vacant spaces on the ground plate.
E8
Connection of 10-pin contact.
-
Separate the halves of the 10-pin connector at the center console and install the 10-pin connector from the new cables.
E9
Fastening cables