940 L4-2.3L SOHC VIN 88 B230F (1992)
Technical Service Bulletin # 887948
Date: 950301
A/C - Unpleasant Odor From Ventilation System
SECTION
8
GROUP
87
NO.
948
DATE
March 1995
RE: Evaporator odor treatment
700/900
THIS BULLETIN SUPERSEDES 87-948, DATED JAN. 1995
REFERENCE: TP 8701201, SECTION 8 (87), CLIMATE UNITS, 700/900 1982-
EVAPORATOR ODOR TREATMENT
A customer may complain of an unpleasant odor from the ventilation system. The NC system evaporator coating may give off such an odor. This can be
minimized by spraying the outside of the evaporator with the A/C odor remover (P/N 1161454-2). Refer also to SB 8-87-942.
MATERIAL / EQUIPMENT FOR TREATING EVAPORATOR:
Modify AS2 nozzle:
-
Fabricate a approx. 25" long rubber hose (3/8" inner diameter)
-
Attach hose to nozzle with hoseclamp.
Protective goggles, shop rags and vacuum cleaner.
MATERIALS:
A/C odor remover (liquid), P/N 1161454-2 USA, 1161712-3 Canada. (AS2 nozzle is included in the treatment kit).
READ WARNING TEXT ON PACK BEFORE COMMENCING WORK. USE PROTECTIVE GOGGLES AND GLOVES WHILE SPRAYING.
SEAL HOLE AROUND THE SPRAY NOZZLE WITH CLOTH WHILE SPRAYING TO PREVENT LEAKAGE OF SPRAY MIST INTO THE CAR
INTERIOR
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01
OPERATION NO.
LABOR DESCRIPTION
TIME ALLOWANCE
87921-2
Evaporator odor treatment
1.1 hr 760-1987, 740, 940
1.5 hr 7601988, 940 SE, 960
Preparations For Spraying
PREPARATIONS FOR SPRAYING
A1
OPEN THE EVAPORATOR DRAINAGE
