940 L4-2.3L SOHC VIN 88 B230F (1992)
-
Connect the cable to fuse 6 and terminal 4 on the central electronics module (CEM).
Use cable tie to attach to existing cable harness.
A4
Remove existing connector from existing cable harness
-
Detach the 5-pin connector from relay for blower (relay 131 in the Service Manual). Refer to the Service Manual:
Section 3 (39) Wiring diagrams
740 1990
TP 31571/1
A5
Cable terminal, opening
-
Detach the cables carefully from the connector's receptacle housing using tool 9814229-2, from repair kit 9814235
Refer to the Service Manual:
Section 3(37). Wiring repairs and replacement of cable terminals,
850. 900
TP3701201
A6
Installation of 5 housing receptacles