Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Maintenance > Timing Belt > Component Information > Service and Repair > Initial Checks > Page 2817

Page 4
background image

Battery Ground Lead

8. Connect battery ground cable.

Adjusting Timing Belt Tension

9. Warm up engine.

-

Check/adjust ignition timing, idle speed and CO content.

-

Check cooling system for tightness. Refill as necessary.

10. Turn off engine.
11. Adjust timing belt tension. Remove rubber plug in timing belt cover.

-

Rotate engine until at top dead centre.

-

Slacken belt tensioner nut.

-

Spring will tension timing belt.

-

Tighten timing belt tensioner nut.

-

Install rubber plug.

NOTE:After driving approx. 1000 km (600 miles: Readjust timing belt.

Maintenance > Timing Belt > Component Information > Service and Repair > Initial Checks > Page 2817

[PREV PAGE] [NEXT PAGE]