940 L4-2.3L SOHC VIN 88 B230F (1992)
(A11)
Disconnect cable from ignition switch
Make up suitable 'tool' by bending a 3-4 mm dia. (0.19-0.16 in.) wire. Press in upper locking tab and withdraw cable.
(A12)
Remove cable adjuster locking clip at gear lever mechanism
Ensure that gear selector lever is in position P. Raise edge of rubber strip around gear lever and unhook cable from arm.
(A13)
Free cable from clips on propeller shaft tunnel and heating duct
(A14)
Remove cable
