940 L4-2.3L SOHC VIN 88 B230F (1992)
Adjust cable at gear lever end until clearance between locking tabs at ignition switch end is approx. 7 mm (0.27 in.) (as illustrated).
Move gear lever to position P. Check that clearance between cable and operating arm at gear lever end is approx. 0.5 mm (0.02 in.).
(A19)
Turn ignition key to position I or II
(A20)
Press cable into position in ignition switch
Ensure that locking tabs are securely engaged.
(A21)
Clip cable to heating duct and propeller shaft tunnel
Check key lock function (A22-A23)
(A22)
