940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
tool lightly on link.
Remove:
-
damper lower bolt Unhook damper from support arm.
-
anti-roll bar mounting bolts from support arm at each side
Press link up into normal position
Fix tool with locking pin.
Remove:
-
track rod bolt Unhook track rod from wheel bearing housing.
-
support arm bolt Tap support arm to free bolt in bushing.
-
nut on link mounting bolt Tap out bolt with brass drift.
Press end of drive shaft into hub
Pull out wheel bearing housing.
Remove:
-
shaft from wheel hub