volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing Fuel Line|Page 26385 > < Replacing Fuel Line
Page 2
background image

Remove clips (4) from the sub-frame.

Installing  

Fuel line  

Install the new fuel line.

Note! Take care not to bend the fuel line out of its original shape. 

Connect the fuel line to the fuel pump by hand.
Remove the drill bit plugging the quick-release connector.
Connect the fuel line to the quick-release fuel hose connector.
A clicking sound should be heard when the quick-release connector engages.
Install clips (4) on the sub-frame.
Adjust the spacer clips on the fuel line so that they are in the same position as they were on the old fuel line.
Screw the fuel line onto the fuel pump (11 mm wrench) (counterhold 14 mm wrench). Torque to  14 Nm .

Finishing  
Carry out a function and leak test.
Check that the fuel line and fuel pipes are installed so that they do not rub or cause rattling.
Install soundproofing and the lower air baffle.

Replacing Fuel Line|Page 26385 > < Replacing Fuel Line