volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Refrigerant > < Procedures|Page 26620
Page 4
background image

-

Install the quick-release connector for the evaporator at the receiver / drier

-

Install compressor pipe coupling. Tighten to: 25± 6 Nm

-

Fill the system with refrigerant. See  Refrigerant, overview See: Description and Operation/Refrigerant, Overview  and  Emptying/vacuum
pumping/filling with refrigerant See: Service and Repair/Emptying/Vacuum Pumping/Filling With Refrigerant. Check for leaks

-

Install the air baffle

-

Install fresh air hose on the control module box

-

Install the battery negative lead.

Refrigerant > < Procedures|Page 26620