C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Remove the cap nut from the extractor
-
Install the extractor bracket and nut
-
Remove the seal
-
Check that no seal residue is left.
Lubricate the edges of the new seal using automatic transmission fluid.
Install locating pin 999 5769 Pilot See: Tools and Equipment/999 5769 Pilot.
Install the seal on the locating pin. Use drift 999 5771 Drift See: Tools and Equipment/999 5771 Drift.
Tap in the seal until the drift is against the transmission.
Remove the locating pin.
Check the oil level according to Checking the oil level See: Service and Repair/Procedures/Checking the Oil Level
Install the drive shaft according to Installing drive shafts See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Drive Shafts,
Installing