C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Line up the markings with each other. Install a ball bearing.
Note! The location of the ball bearings.
-
Turn the inner ring and the bearing race.
-
Position the ball bearings in the same position as before, one at a time.
Greasing and installation
Lubricate the constant velocity joint thoroughly.
Install a new lock ring to the joint's inner ring.
Apply grease behind the joint via the shaft hole in the inner ring.
Use grease as specified in Oil, grease etc
Install the new boots on the drive shaft