S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Install three clips from the kit on the front edge of the panel above the windscreen wiper motor.
-
Guide the cable up to the top of the engine compartment to the position illustrated.
Illustration A
-
Press the front intake cable into the clips. Guide down the cable at point (1) and route down through the engine compartment (behind the AC
pipes) down to the strut in the right link arm mounting.
Illustration B
-
Clamp in the cable, from the top of the engine compartment and down, using a tie strap.
Note! The cable must not be clamped directly to AC, fuel or brake pipes.
