S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Install the cover or the ashtray on the new rear end. Press so that both catches engage.
Installation
-
Fold up the holder on the rear end as illustrated
-
Position the rear end in the lower edge of the centre console so that the rear end locating pins align with the corresponding holes in the centre
console
-
Reconnect the connectors. Press the connectors into the groove. If there is a cable beside the holder, secure it
-
Fold up the rear end towards the top edge of the centre console. Press the locating pin and catches at the top edge and on the sides until they
engage
-
Tighten the upper mounting for the rear end piece using the two screws
-
Reinstall the centre console locker cover. Secure the centre console locker using the two screws
-
Hook the panel into place beside the bracket for the cover.
-
Fold the holder down towards the rear end. Press the holder into place.
Use
With waste paper bags:
