S60 L5-2.4L VIN 64 B5244S6 (2003)
Lift in the steering gear in from the left (left-hand drive cars).
Lift in the steering gear in from the right (right-hand drive cars).
Allow the steering gear to rest on the sub-frame.
Install the oil pipes on the steering gear. Use new O-rings. Tighten to 25 Nm.
Secure the oil pipes in the holders on the power steering (left-hand drive).
Applies to cars with speed related power steering:
Slide the connector to the terminal at the brake servo.
Install the cabling in the clip along the ABS cable.
Applies to all models:
Note! Always check carefully that the ball joint's screw hole aligns with the cut-out in the steering gear shaft.
Align the steering shaft joint.