volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

DVD Player|RTI/DVD|Page 25275 > < DVD Player|RTI/DVD|Page 25273
Page 13
background image

-

Clamp the cable under the tailgate sill trim panel using the four tie straps (1) from the kit

-

Connect the cable to the lower socket (2) on the aerial amplifier

-

Route the cable to the left-hand rear wheel well.

Applies only to cars with a CD changer

Remove:

-

the blue connector with the cable (1) from the CD changer. Secure the cable. The cable will not be reused

-

the DIN cable (2) from the CD changer. Position the DIN cable at the front edge of the CD changer. the DIN cable will be connected to the reverse
of the DVD reader later.

Applies only to cars with a CD changer

-

Take the DIN cable (1) (purchased separately). Connect the cable to the rear edge of the CD changer

-

Connect the blue connector (2) on the new power supply cable for the CD changer.

-

Screw the DVD reader into place on the bracket. Use the four screws from the kit.

Connect:

DVD Player|RTI/DVD|Page 25275 > < DVD Player|RTI/DVD|Page 25273