volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Display Screen / Loudspeaker, RTI (Road Traffic Information), Replacing|Page 25510 > < Display Screen / Loudspeaker, RTI (Road Traffic Information), Replacing|Page 25508
Page 16
background image

-

Route the new cable (C in the kit illustration) for the Global Positioning System (GPS) aerial. Follow the routing of the existing loudspeaker cable
inside the seat belt holder (2)

-

Connect the cable to the Global Positioning System aerial

-

Secure at the points (3)

-

Route the cable through the lead-in (4) to the rear edge of the wheel arch.

Installing the DVD reader

Does not apply to USA

-

Remove the existing antenna amplifier (if applicable)

-

Connect the cable (2) for the new antenna amplifier (1) to the connector (3) for the antenna in the rear bumper by the right-hand tail lamp

-

Position the aerial amplifier on the panel edge in front of the right-hand tail lamp

-

Tighten the antenna amplifier onto the edge of the panel.

-

Route the new transparent single cable (D in the kit illustration) from the lower terminal (1) for the aerial amplifier, along the existing cable
harness in the rear crossmember and to the rear edge of the left-hand rear wheel well

-

Clamp the cable at the existing cable harness using tie straps (2)

-

If the existing aerial amplifier has been removed, reinstall the disconnected black cable in the upper socket (3) in the aerial amplifier.

Display Screen / Loudspeaker, RTI (Road Traffic Information), Replacing|Page 25510 > < Display Screen / Loudspeaker, RTI (Road Traffic Information), Replacing|Page 25508