V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Flywheel: Testing and Inspection
FlyWheel, Radial Clearance, Checking
Flywheel, radial clearance, checking
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Measuring the radial play
Turn the secondary masses of the flywheel in one direction until the spring starts to tension. Allow the flywheel to spring back.
Note! It is important that the flywheel can spring back freely.
Mark a line on both primary and secondary masses on the flywheel.
Turn the secondary mass of the flywheel in the same way in the opposite direction.
Mark the primary side of the flywheel in line with the marking on the secondary side.
The distance between the lines must be less than 35 mm.
