Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > With Mechanical Adjuster > Page 1988
Install the timing gear pulleys with two screws so that they precisely act on the pulleys.
Tighten center screw on the camshaft belt tensioner to 5 Nm (3.7 lb ft)
Install new camshaft belt over crankshaft pulley wheel.
Then install the belt in the following order:
Adjust timing gear pulleys so that the screws are not at the limit positions in any of the oval holes.
Tighten timing belt
Adjust the belt tensioner:
This adjustment is always carried out on a cold engine. Suitable temperature is 20°C/68°F. At higher temperatures, for example with
|[PREV PAGE] [NEXT PAGE]|