Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Installing Propellar Shaft, All-Wheel Drive (AWD) > Page 5086

Page 11
background image

-

Install:
-

the propeller shaft in the car 

-

the 2 screws (2). Tighten to 25 Nm

-

Tighten the 2 screws (1). Tighten to 25 Nm.

-

Check that the viscous coupling and propeller shaft flange mating surfaces are clean.

-

Install the propeller shaft as marked. 

-

Use new screws of the same length. Reinstall the screws in the same positions. 

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Installing Propellar Shaft, All-Wheel Drive (AWD) > Page 5086

[PREV PAGE] [NEXT PAGE]