volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 5
background image

9. Install:

-

Wheel.

Check that brake disc and pad contact surfaces are clean.
Grease hub center in front of pads with rustproofing agent 1161405-4.
Install bolts, but do not tighten.
Now tighten them in pairs to: 110 Nm.

When tightening with socket wrench, use torque sleeve 1158147-7.

Transmission and Drivetrain > Manual Transmission/Transaxle > Seals and Gaskets, M/T > System Information > Service and Repair > Transaxle Side Seals, M/T > Page 5143

< PREV PAGE NEXT PAGE >