volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Procedure (Driver's)|Page 7122 > < Replacement Procedure (Driver's)|Page 7120
Page 8
background image

Tighten the retaining screw in the centre of the steering wheel. Torque setting = 40 Nm (30 ft-lb).

CD A25. Installation of steering wheel airbag module

Ignition off and disconnect the battery negative lead

WARNING!  Do not connect the battery when removing or installing the steering wheel airbag module.

Removal of the special tools

Remove the special tool 998 8695.

WARNING!  Never use an ohmmeter or any other charged measuring instrument on a disconnected, unreleased airbag module. There is a risk
that the module could be released.

Ignition in position I

Turn the ignition key to position I to unlock the steering lock.

Installation of steering wheel airbag module

Replacement Procedure (Driver's)|Page 7122 > < Replacement Procedure (Driver's)|Page 7120