V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Installation:
Install the lower part of the steering wheel (1)
Connect the airbag module connector to the module (2)
Position the module in the steering wheel (3). Make sure that the ignition wire is not trapped.
Replacing the screws on the steering wheel
Attach the airbag module with the 2 screws, Torx 30, in the recesses of the steering wheel. Turn the steering wheel to get to the screws. Torque
setting = 10 Nm (7.5 ft-lb).
CAUTION! Tighten the upper screw first. This ensures the horn operates.
Final Work
CDA26. SRS airbag date label
NOTE: Do not forget to replace the airbag date label on the driver's side B pillar with a new label.