volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

SRS Connector|Page 7212 > < SRS Connector|Page 7210
Page 2
background image

Remove front seat 
Preparation:
-

Turn ignition off.

-

Disconnect cable from negative battery terminal.

Fig. 28 Front Seat Removal

Remove:
-

Seat pocket(A).
Lift front edge and push backward.

-

Seat belt from chair attachment (bolt on outside of seat).

-

Cover (B) at front edge of seat rail.

-

4 attachment bolts (C) in seat rails.

-

Disconnect connectors to heating elements (under seat).

-

Disconnect connector to seat-belt buckle (under seat). Lift seat straight up (control tabs at front and rear edge).

SRS Connector|Page 7212 > < SRS Connector|Page 7210