volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7347 > < Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7345
Page 7
background image

-

Connect SRS ignition cable igniter connector to seat belt tensioner.

Installing "B" Post Inner Panel 

-

Install "B" post inner panel. Push into place (attached with clips).

Installing Front Seat 

-

Install seat. Align seat rail guide pins with their holes in the floor.

-

Connect connectors to the front seat (under the seat by the front edge of the seat rail).

WARNING:  Ensure that nobody is in the car when the battery is being connected. 

-

Switch the ignition to position II.

Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7347 > < Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7345