V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
Connect battery negative lead.
-
Seat should be as far back as possible.
-
Install 2 mounting bolts (14 mm) and panel to front edge of the seat rails.
-
Seat rail tightening torque = 40 Nm (30 ft. lbs.).
-
Push seat forward.
-
Install 2 mounting bolts (14 mm) and panels in the rear edge of the seat rails.
-
Seat rail tightening torque = 40 Nm (30 ft. lbs.).
-
Install seat belt to seat mounting (1 x 12 mm bolt).
-
Seat belt mounting tightening torque =40 Nm (30 ft. lbs.).
NOTE: The outer rear mounting bolt is tightened last. Otherwise the seat may not be properly aligned.
Verify Functions
