volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7349 > < Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7347
Page 9
background image

Check that: 
-

the seat belt (inertia) reel locks as it should. Test this by pulling it out and jerking it repeatedly.

-

the seat belt locks into the seat belt buckle.

-

seat belt reminders work.

-

power seats can be controlled.

Reset The SIPS-bag 

NOTE:  If the seat is not equipped with a SIPS-bag, skip the reset procedure.

WARNING:  If the front seat is equipped with a SIPS bag this must be reset when work is finished. Remove the transport safety device from
the SIPS sensor. Never apply external force to side of seat.
 

-

Remove the transport safety device from the SIPS sensor.

-

Install the transport safety device in the holder on the inside of the cover.

Installing Front Seat Seat Compartment 
 

Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7349 > < Front Seat Belt Buckle and Seat Belt Tensioner - Replacement|Page 7347