V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
Using a pair of channel lock type pliers, release the arm from the splines on the shaft so it rotates freely.
Note!
Adjust the wipers as illustrated in A and B so that the blade is approximately 5 mm (0.2") above the stop after the nut has been tightened.
-
Adjust the position of the wiper arm as illustrated.
-
Position the wiper blade 5 mm (0.2") from the stop.
-
Counter hold the wiper arm by hand while tightening the nut 4 Nm (3Ftlb).
-
Check that wiper arms park horizontally.
Replacing the stop for the headlight wiper
3
-
The left-hand section of the illustration shows an early version of the wiper blade stop.