V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
-
The right-hand section of the illustration shows a new version of the wiper blade stop lug.
-
Check which version of the rubber stop is installed.
-
Replace the wiper blade stop lug if it is the early version. See the method below.
-
Remove the existing stop lug. Pull off the stop using pliers (left-hand section of the illustration).
-
Install the new stop lug as illustrated by pressing the stop lug on to the mounting (right-hand section of the illustration).
Note!
The The stop lug must be installed as illustrated. If not installed correctly, the wiper arm may get stuck underneath the stop lug.