Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Crankshaft Main Bearing Seal > Component Information > Technical Service Bulletins > Page 1196

Page 5
background image

-

Tighten transmission in position. 

-

Remove fixture.

16. Secure torque converter to carrier plate 

-

Finger-tighten all bolts. 

-

Tighten bolts alternately to 30 Nm (22 ft. lbs.) (Torx 40).

17. Install transmission support member

-

Lift transmission using fixture tool No. 999 5972, or equivalent.

-

Secure support member to side members.

Tighten to: 50 Nm (37 ft. lbs.) 

-

Tighten nut securing bump stop to support member.

Tighten to: 50 Nm (37 ft. lbs.) 

18. Install gear selector lever 

-

Reconnect control rod and reaction arm to lever mounting. 

-

Install locking clips.

19. Reconnect oil cooling pipes and connectors 

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Crankshaft Main Bearing Seal > Component Information > Technical Service Bulletins > Page 1196

[PREV PAGE] [NEXT PAGE]