V90 L6-2.9L VIN 96 B6304S (1998)
Timing Belt With Tension Meter
3. Check belt tension.
-
Wait 5 minutes after adjusting belt.
-
Place gauge 998 8500 between exhaust camshaft drive pulley and water pump.
-
Read gauge.
-
If belt tension is correct, gauge should read between:
With 21mm Belt: 3.5 - 4.6 units
With 23mm Belt: 2.7 - 4.2 units
With 28mm Belt: 2.5 - 3.5 units
-
If tension is incorrect, tensioner must be replaced.
Timing Belt With Tensioner
4. Removing timing belt.
-
Remove tensioner upper mounting bolt.
-
Undo lower mounting bolt.
-
Twist tensioner to free plunger.
-
Remove bolt.
-
Remove tensioner.
-
Remove belt.
NOTE: Do not turn crankshaft or camshaft while belt is removed.