Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank Mechanism, Measuring > Page 2732

Page 6
background image

Visually check the bearing shells.
If in doubt measure out-of-round. Use a bore gauge.
For the correct diameter of the bearing recess, see Specifications, mechanical, B5244T5, B5254T2 See: Specifications/Mechanical
Specifications/Specifications, Mechanical.

Checking the connecting rod in a connecting rod aligner

Check for out-of-true and twisting.

Caution! Check that the aligner fork is unburred and round at the handle.Remove and apply the expander at the big end between each
alignment operation.

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank Mechanism, Measuring > Page 2732

[PREV PAGE] [NEXT PAGE]