Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank Mechanism, Measuring > Page 2741
Crankshaft: Service and Repair
Crank mechanism, assembling
951 2767 Roller See: Tools and Equipment/951 2767 Roller
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
For tightening torques not in the text, see Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque.
Ensure that the all components are completely clean.
Installing the piston cooling valve and nozzles
Install the piston cooling nozzles. Tighten to 17 Nm.
Install the piston cooling valve. Use a seal washer. Tighten to 38 Nm.
Classification of main bearings
|[PREV PAGE] [NEXT PAGE]|