Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank Mechanism, Measuring > Page 2742
Wipe clean the bearing recesses in the block and the intermediate section.
Install the main bearings in the cylinder block and the intermediate section. See the table.
Caution! When reusing old bearing covers, ensure that they are correctly positioned for the direction of rotation of the crankshaft.
For example: The marking on the block at bearing recess 1 is B. The marking on the crankshaft at the corresponding bearing recess is C.
Note! The thickest of the bearing caps must always be installed in the intermediate section. This is keep the center line as straight as possible.
The intermediate section
Wipe the surfaces dry.
|[PREV PAGE] [NEXT PAGE]|