XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Trunk / Liftgate Handle: Service and Repair
Handle Outer Tailgate Upper, Replacing
Handle outer tailgate upper, replacing
The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Removing the exterior handle from the upper tailgate
Remove:
-
the wiper arm. See Tailgate wiper arm / blade, replacing See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Tailgate Wiper
Arm/Blade, Replacing
-
the panel. See Panel, tailgate, replacing
-
the 3 screws for the wiper motor
-
the wiper motor
-
the mechanical cable for the outer opening handle
-
the 4 nuts
-
the connector.
Remove the outer handle.
Installing the exterior handle on the upper tailgate
Note! For tightening torques, see Specifications See: Specifications.
Install:
-
the opening handle
-
4 M6 nuts. Tighten
-
the mechanical cable for the outer opening handle
-
the wiper motor
-
the connector for the wiper motor
-
the 3 M6 screws. Tighten
-
the panel. See Panel, tailgate, replacing
-
the wiper arm. See Tailgate wiper arm / blade, replacing See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Tailgate Wiper
Arm/Blade, Replacing
