volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Pinion Seal for the Bevel Gear|Page 6352 > < Replacing the Pinion Seal for the Bevel Gear|Page 6350
Page 10
background image

Removing the transmission

FWD

-

for gasoline engines, see Transmission, removing See: Service and Repair/Removal and Replacement.

AWD

-

for gasoline engines, see Transmission, removing See: Service and Repair/Removal and Replacement 

Removing the torque converter

Pull the torque converter straight out of the transmission. Check the torque converter throat for damage.

Removing the sealing ring from the oil pump

Use extractor 999 5069 EXTRACTOR See: Tools and Equipment/999 5069 Extractor.

Installation

Installing a new sealing ring on the oil pump

Use drift 999 5117 PUNCH See: Tools and Equipment/999 5117 Punch.

Note! Drift 999 5117 modified according to Tool Bulletin.

Installing the torque converter

Replacing the Pinion Seal for the Bevel Gear|Page 6352 > < Replacing the Pinion Seal for the Bevel Gear|Page 6350