XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Knock the seal into the bevel gear. Use drift 999 7087 Drift See: Tools and Equipment/999 7087 Drift together with spacer ring 7086-1. Ensure that the
tool goes towards the bevel gear housing. Check that sleeve 7087-1 is removed with the tool.
Finishing
Installing the bevel gear
Install the bevel gear. See
Filling with oil
Top up with new oil. See Replacing the pinion seal for the bevel gear See: Replacing the Pinion Seal for the Bevel Gear.
Sealing Rings Bevel Gear, Replacing
Sealing rings bevel gear, replacing
Special tools:
999 5371 NUTS-DIFF.BEARING) 1035 See: Tools and Equipment/999 5371 Nuts-Diff. Bearing 1035
999 5654 Punch See: Tools and Equipment/999 5654 Punch
999 5655 Punch See: Tools and Equipment/999 5655 Punch
Note! To remove the drive shaft, see Replacing the front right drive shaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Drive Shaft Right, Replacing.
Sealing ring for drive shaft front right side, replacing
Removing the sealing ring
Lever the sealing ring off the crown wheel shaft.
Use a screwdriver or a jimmy bar.
Installing a new sealing ring