XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Seals and Gaskets: Service and Repair
Drive Shaft Seal Rear Final Drive Housing, Replacing
Drive shaft seal rear final drive housing, replacing
Special tools:
999 5591 Punch See: Tools and Equipment/999 5591 Punch
Preparatory work
To remove drive shafts, see Drive shaft rear, replacing .
Removing the drive shaft seal
Use a jimmy bar to carefully remove the seal.
Installing the drive shaft seal
Lubricate the lip of the new seal using wheel bearing grease, P/N 116 1251 (400 g).
Use tool 999 5591 Punch See: Tools and Equipment/999 5591 Punch.
Note! It is important that the seal is positioned correctly. The positions differ between the left and right-hand sides. See below.
Positioning the seals